Scales CERTUS® Balance

Producer:

State regisetr of measuring equiment of Ukraine У 2786-09

Description:

  • LCD display with illumination, height of symbols is 16 mm;
  • Protective cap: wall – glass, upper part – aluminum;
  • Platform: stainless steel;
  • Set on level: using four adjustable feets and bubble level;
  • Power supply: AC 220 V via mains adapter or from built-in battery 6 V, 1,2 A•h up to 40 hours;
  • Interface RS 232C – as a base set;
  • USB and Bluetooth – options.

Functions:

  • Tare sample up to 100% of capacity, gross/net mass determination;
  • Selection of 14 measure units;
  • Mass measurement in per cent;
  • Counting function;
  • The function of summation, which allows you to store the results of measurements and recall the accumulated sum;
  • Automatic zero tracking;.

Features:

  • Fast and stable measurement of the mass: the stabilization time of readings when measuring no more than 5 seconds;
  • Blocking the scales if the loaded mass of the goods exceeds the maximum capacity;
  • Printeed data: date, time, mass.


Scale accuracy class “high” according to ДСТУ EN45501:2007

Duplicating board for laboratory scale

Execution Max, g Min, g Valid division, g Verification division, g Protector cap Platform size, mm
СВА-150-0,001 150 0,04 0,001 0,01 + Ø 80
СВА-300-0,005 300 0,1 0,005 0,05 + Ø 120
СВА-600-0,01 600 0,5 0,01 0,1 +
СВА-1500-0,02 1500 1,0 0,02 0,2 160х180
СВА-3000-0,05 3000 2,5 0,05 0,5
СВА-6000-0,1 6000 5,0 0,1 1

Scales meet the requirements of the current normative documentation of Ukraine:

  • DSTU EN 45501
  • DSTU GOST OIML R 76-1
  • Technical regulations for non-automatic weighing instruments
  • Technical Regulation for electromagnetic compatibility of equipment
  • Technical regulations for low-voltage electrical equipment

Documentation kit:

  • Type Verification Certificate No. UA.TR.113-0010 / 01-16 dated June 29, 2014, valid until June 28, 2026.
  • Type Verification Certificate No. UA.TR.113-0010 / 02-16 dated June 29, 2014, valid until June 28, 2026.
  • Certificate of Conformity
  • Declaration of Conformity
  • Instructions for use with the marking offset (based on the positive results of the evaluation by module F of the Technical Regulation).